Eaton IQ 150S User & Installation Manual

IM02601006E www.eaton.com 7-5IQ 150S/250S 7: Using the Submeter2. Press the Enter button from the Main Menu to view the Parameters screen for the mode that iscurrently active.7.2.3: Using Reset ModeReset mode has two options:• Reset: Demand (rStd): resets the Max and Min values.• Reset: Energy (rStE): resets the energy accumulator fields.1. Press the Enter button while either rStd orrStE is in the A window. The Reset DemandNo or Reset Energy No screen appears.• If you press the Enter button again, theMain Menu appears, with the next mode inthe A window. (The Down button does notaffect this screen.)• If you press the Right button, the ResetDemand YES or Reset Energy YES screenappears. Press Enter to perform a reset.NOTE: If Password protection is enabled forreset, you must enter the four digit passwordbefore you can reset the meter (see Chapter 5 forinformation on Password protection). To enter apassword, follow the instructions in Section 7.2.4.CAUTION! Reset Demand YES resets all Max and Min values.2. Once you have performed a reset, the screen displays either “rSt dMd donE” or“rSt EnEr donE”and then resumes auto-scrolling parameters.ABC---MENU ENTERABC---MENU ENTERABC---MENU ENTERABC---MENU ENTER