Eaton IQ35M-ENC Installation Manual

Also see for IQ35M-ENC: Installation guide

2Instructional Booklet IB02601010EEffective October 2013IQ35M-ENC enclosureinstallation guideeaton www.eaton.comProduct overviewThe IQ35M-ENC enclosure offers a mounting option for IQ 35MSeries energy meters that helps protect from tampering andthe elements. The enclosure is equipped with DIN rail mountinghardware for easy installation, and a NEMAT 4X rating ensuresdurability. The swing panel kit and multiple locking options provideadditional security from unwanted tampering.4.25(108.0)4.25(108.0)6.75(171.5)6.75(171.5)8.50(215.9)5.30(134.6)Figure 1. Dimensional Drawings in Inches (mm)Product diagramabcef gda Enclosureb DIN railc Hinged lidd Claspe Brackets for swing panel coverf Swing panel coverg Mounting feet(hardware not pictured)InstallationStep 1. Install DIN rail clips to the back of theIQ 35M Series meterThe IQ 35M Series meter is shipped with a set of three DIN railclips included. Insert these clips into the slots on the back of thehousing from the middle, moving outward. Stopping pegs must facethe underside of the housing. Push clips into place until there is anaudible click.DIN Rail Clip(included with IQ 35M meter)When attaching the clips to theunderside of the IQ 35M meter, thesestopping pegs must face in towardthe meter housing surface. Set pegsinto the available slots on the meter.When all clips are in place, the white clips must be flush with thetop edge of the housing, and the black clip must protrude slightlypast the bottom edge.

/ 4

Related manuals for Eaton IQ35M-ENC