4The MPAD-C-A 12-24V is designed to be mounted using either: Flush fixing, or Surface fixing, using the optional Surface Mounting Box (part no. SB-C A).Both methods are illustrated below.Warning - be careful bending springs when mounting unit.InstallationImportantEnsure that the cables are formed as shownbefore affixing the cable clamp. The clampMUST clamp the outer sheath(s) only.Bend cores as shown.Wire stripping detailsFlush fixingSurface fixingHead locking1 32 4Hole Ø30mmMAX1 2Remove metallocking clip fromrear of unit. Adjust head torequired position. Push clip into positionshown below to lockhead. To remove clip, leverout with a smallscrewdriver.1 543Hole Ø74mm Attach cable clamp2If the range is compromised by theceiling construction / material. Add thesupplied 20mm spacer ring.

Eaton MPAD-C-A Product Manual