Eaton PORTFOLIO LSR2B Installation Instructions Manual

INS #Brand Logoreversed out ofblackINS #697916IMPORTANT: Read carefully before installing fixture.Retain for future reference.WARNINGRisk of Electrical Shock! Disconnect power at fuse orcircuit breaker before installing or servicing.WARNINGRisk of Fire! Do not install insulation within 3 inches(76 mm) of any part of the luminaire fixture or in away that may entrap heat.WARNINGInstallation and servicing to be performed onlyby qualified personnel, If not qualified, consult anelectrician.INS #IB520031ENInstallation Instructions – LSR2B / LSSQ2B Commercial LEDRough-InInstructions d’installation – DEL commerciale LSR2B / LSSQ2BbruteInstrucciones de instalación de las luminarias LED de uso comercialLSR2B y LSSQ2B en áreas ocultasWARNINGDo not energize the LED Engine until the protectivecovering has been removed and the lower trimproperly installed.otee:N This fixture should be supported by main runners orother structure that is capable of supporting fixtureweight of 7 Ibs.SAFETY: When using electrical equipment, basic safetyprecautions should always be followed, including thefollowing:1. This unit is for surface or pendant mounting only. Donot use in hazardous locations nor near gas or electricheaters.2. Do not use this equipment for other than the intendeduse.3. Install only in accordance with National Electrical Codeand local regulatory agencies’ requirements.T MAperture HeightLSR2B 2.75” 10-1/8”LSSQ2B 2.75” 10-3/16”