Eaton Power Xpert 9395 Installation Manual

Also see for Power Xpert 9395: Installation and operation manual Installation and operation manual Installation and operation manual Installation and operation manual Installation and operation manual

Contents

INSTALLATIONPower Xpert 9395 Integrated Battery Cabinet (Model 1085 and 1085HR) Installation Manual 164201687 Rev 4 www.eaton.com/powerquality 4-5NOTE Two cabinet joining brackets are provided for securing each cabinet at the top and bottom. A flatbracket joins the top of the cabinets and a larger flat bracket joins the cabinets at the bottom. The small flatbracket is attached to the cabinet tops first.8. Remove the left‐hand and right-hand screws from the adjacent top door hingesof the battery cabinets.9. Locate the small flat bracket from the field kit. Align the holes in the small flatbracket over the hinge screw holes. Replace the screws in the hinges, securingthe bracket to the cabinets (see Figure 4‐3).10. Locate the large flat bracket from the field kit. Place the bracket over the bolts onthe bottom side of the adjacent lower hinges on the battery cabinets (seeFigure 4‐4).Bracketfrom KitExisting ScrewsTop View with Small BracketBattery Cabinet 1 Battery Cabinet 2Large Bracket(see Figure 4‐4)NOTE When cabinets are properly aligned, all cabinet doors are flush.Figure 4‐3. Battery Cabinet to Battery Cabinet Joining Brackets