Page 178 IM02601004E www.eaton.comH SpecificationsDimensions/Clearances/WeightsMeterHeight: 8.32 inchesTop/Bottom Clearance -3 inches minimumClearance required for proper ventilationWidth: 8.2 inchesSide clearance - 2 inches minimumClearance required for proper access to terminationDepth: with terminals and panel mounting feet - 6.8 inchesAdd 1.2 inch depth clearance for terminal plug field cable terminationAdd 3.2 inch depth clearance for RS232 or Fiber OpticShipping Weight 7.1 lbs.Electrical SpecificationsDisplay Power Supply Input (DG2)24 Vdc +/- 10%8 W maximum drawCommon TVS bonded to ground ~ 300VWiring to 4 position removable terminal plug12-18 AWG, wire ferrules recommendedMeter Power Supply InputPXMPS-1 Standard (PS1):100 - 240 Vac +/- 20%, 47 - 63 Hz110 - 250 Vdc +/- 20%50W maximum drawMinimum Ride through 0.5 SecNeutral (-) TVS bonded to ground ~ 575VWiring to 3 position removable terminal plug12-18 AWG, wire ferrules recommendedMeter PXMCM 24VDC outputs (CM4, CM6)24VDC +/-10%10W maximum loadOutput switched off on PS1 power downCommon to paired RS485 portCM3/CM4CM5/CM6Common TVS bonded to ground ~ 300VWiring to 3 position removable terminal plug12-18 AWG, wire ferrules recommendedMeter PXMIO Discrete Inputs (IO1)Qty 8 common circuits IO1.1-1.824V internal source IO1.9To drive external dry contactInput impedance ~ 2.2K ohmInput current draw ~ 10 mAMinimum pulse width 10 millisecondMaximum pulse rate 20 HzCommon TVS clamped to ground ~ 300VWiring to 9 position removable terminal plug12-18 AWG, wire ferrules recommendedSpecifications, Con’t.
