Eaton Power Xpert PXM 4000 User And Installation Manual

Also see for Power Xpert PXM 4000: Quick start guide User and installation manual User manual

Contents

Page 92 IM02601004E www.eaton.com6 Meter Settings Using the Web ServerPQ INDEXThe PQ Index page provides the means to rank the importance of the information captured onthe power quality page. This is done by assigning a value from 0 to 50 for Swell, Sag, dv/dt, THDVoltage, THD Current, and Flicker. For example, if a user does not want the Power Quality page torecognize Flicker activity, the Flicker percent can be set to 0. Measurements of greater importancecan be assigned higher values accordingly.Locating PQ Index Setup on the Web1. From the Settings main page, select the Metering tab.2. Select the PQ Index arrow.3. Underneath the PQ Index arrow is a list displaying all of the current settings.4. Click Edit to change any of the listed settings to values ranging from 0 to 50. The default valueis 10.5. Click Save when new entries are completed. Click Close to exit Edit mode.