Eaton T2235 Series Installation, Operation And Maintenance Manual

Contents

Eaton T2235 Series eATS ePDUs P-164000014—Rev 1 www.eaton.com/ePDU 5Chapter 2 SafetyIMPORTANT SAFETY INSTRUCTIONS — SAVE THESE INSTRUCTIONSThis manual contains important instructions that you should follow during installation andmaintenance of the Eaton Automatic Transfer Switch (eATS) Enclosure Power Distribution Unit(ePDU) models. Please read all instructions before operating the equipment and save this manualfor future reference.DANGERThis ePDU contains LETHAL VOLTAGES. All repairs and service should be performed byAUTHORIZED SERVICE PERSONNEL ONLY. There are NO USER SERVICEABLE PARTS inside theePDU.CAUTIONl To reduce the risk of fire or electric shock, install this ePDU in a temperature and humiditycontrolled, indoor environment, free of conductive contaminants. Ambient temperature mustnot exceed 45°C (113°F). Do not operate near water or excessive humidity (95% maximum).l To comply with international standards and wiring regulations, the total equipment connected tothe output of this ePDU must not have an earth leakage current greater than 3.5 milliamperes.l For PERMANENTLY CONNECTED EQUIPMENT, a readily accessible disconnect device shall beincorporated in the building installation wiring.l For PLUGGABLE EQUIPMENT, the power outlet shall be installed near the equipment and shallbe readily accessible.Consignes de sécuritéCONSIGNES DE SÉCURITÉ IMPORTANTES — CONSERVER CES INSTRUCTIONSCe manuel contient des instructions importantes que vous êtes invité à suivre lors de touteprocédure d'installation et de fonctionnement de la ePDU. Veuillez consulter entièrement cesinstructions avant de faire fonctionner l'équipement et conserver ce manuel afin de pouvoir vous yreporter ultérieuremen.DANGER!Cet ePDU contient des TENSIONS MORTELLES. Toute opération d'entretien et de réparation doitêtre EXCLUSIVEMENT CONFIÉE A UN PERSONNEL QUALIFIÉ AGRÉÉ. AUCUNE PIÈCERÉPARABLE PAR L'UTILISATEUR ne se trouve dans la ePDU.