Eaton XC-152 Series Manual
2 Compact PLC XC-152 05/17 MN050001ZU DE www.eaton.com3 Installation.................................................................................. 253.1 Prerequisites for the location of use ............................................ 253.1.1 Installation position ...................................................................... 253.2 Conditions for marine approval (DNV GL) .................................... 263.2.1 Radio interference suppression filter for the 24 V DC supply...... 273.3 Communication cables................................................................. 283.3.1 Preparing the cables with the SUB-D plug................................... 293.3.2 Screening the communication cables used ................................. 303.4 Unpacking and checking the equipment supplied ....................... 313.5 Mounting ..................................................................................... 323.5.1 DIN-rail mounting ......................................................................... 333.5.2 Screw fixing ................................................................................. 343.6 Preparing the device for operation............................................... 353.6.1 Power supply 24 V DC ................................................................. 364 Commissioning .......................................................................... 394.1 Initial Commissioning................................................................... 404.1.1 Configuring the system settings.................................................. 404.1.2 Connect Computer and XC-152 in the network ........................... 414.1.3 Connect Computer and XC-152 connected directly with a cable. 414.1.4 Setting the IP address with an SD card ....................................... 414.2 Running the XC-152 ..................................................................... 424.3 External memory.......................................................................... 434.3.1 Inserting and removing the SD card ............................................ 435 External connections ................................................................. 455.1 Layout overview........................................................................... 465.2 USB interfaces ............................................................................. 475.2.1 USB device .................................................................................. 475.2.2 USB Host ..................................................................................... 475.3 Ethernet ....................................................................................... 485.4 Serial interfaces to other devices................................................. 495.4.1 RS232 (System Port).................................................................... 505.4.2 RS485 .......................................................................................... 515.4.3 CAN ............................................................................................. 535.4.4 Profibus........................................................................................ 556 XC-152 as a SmartWire-DT coordinator .................................. 596.1 SmartWire-DT operator control and display elements ................. 596.1.1 POW/AUX SWD power supply .................................................... 606.1.2 SWD master interface ................................................................. 62 |
Related manuals for Eaton 167849
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine