Eaton XV400 10.4" Operating Instructions Manual

Also see for XV400: Operating instructions

Contents

3 Safety regulations3.4 Device related hazardsMICRO PANEL XV400 10.4"/12.1"/15" 12/2010 MN04802010Z-EN www.eaton.com 193.4 Device related hazardsDANGERExplosion hazardDeath, serious injury or material damage may occur if an electrical plug connectionis removed in a potentially explosive atmosphere during operation or if the device issubjected to hazardous knocks. Only use the device in the following environments:- Environments not subject to explosion hazards- Potentially explosive atmosphere, Zone 22 (according to ATEX 94/9/EC)- Potentially explosive atmosphere, Zone 1 and 2 (only 10.4" and 12.1" deviceswith a stainless steel front that are installed in pressurized housing) Prevent the device from being subjected to hazardous knocks. Only operate the device in potentially explosive atmospheres if it is correctlymounted. Switch off the device before removing the plug connections.WARNINGLive parts in the deviceWhen the device is opened, there is a risk of electric shock if live parts are touched. The device must not be opened.WARNINGPotential equalization currentsLarge equalization currents between the protective ground systems of different de-vices may cause operational malfunctions due to signal interference and may evencause fires. If necessary, a potential equalization conductor should be installed parallel to thecable. This should have a cross-section that is a multiple of the cable shield.CAUTIONElectrostatic dischargeElectrostatic discharge may damage or destroy electronic components. Avoid contact with components (such as connector pins) that are susceptible toelectrostatic discharge. Discharge (by touching a grounded metal object) any static charge accumulatedin your body before touching the device.