Eaton XV400 10.4" Operating Instructions Manual

Also see for XV400: Operating instructions

Contents

1 General1.1 Purpose of these Operating InstructionsMICRO PANEL XV400 10.4"/12.1"/15" 12/2010 MN04802010Z-EN www.eaton.com 71 General1.1 Purpose of these Operating InstructionsThese Operating Instructions contain the information required for the correct and safe use of theMICRO PANELs XV400 10.4"/12.1"/15"; MC2 10.4"/12.1". The Operating Instructions are part of thedevices and must therefore be kept nearby.These Operating Instructions describe all aspects of the devices: transport, installation, commissioning,operation, maintenance, storage and disposal. The operating system and the application software arenot described.1.2 Comments about this documentPlease send any comments, recommendations or suggestions relating to this document to info-auto-mation@eaton.com.1.3 Additional documentationThe following documents may be helpful in the use of the device in addition to this document. Thesecan be downloaded from our home page (www.eaton-automation.com/en), «DOWNLOADS» section.[1] MN05010007Z-EN System Description Windows CE(operation of the Windows CE operating system on MICRO PANELs)[2] MN05010009Z-EN System Description Networks in Brief(information on networks in general and on the integration of PCs and MICRO PANELs innetworks) Read Chapter 3 Safety regulations,  15 before working with the device. This containsimportant information for your personal safety. This chapter must be read and under-stood by all persons working with this device.WARNINGIncomplete copy of the Operating InstructionsWorking with individual pages of these Operating Instructions may cause damageto property or personnel by failure to observe safety-related information. Always work with the complete document.