Eaton Xpert Meter 2000 Series Quick Start Manual

Also see for Power Xpert Meter 2000: Quick start guide User guide Quick start guide Instructions

PXM 2000 Quick Start GuideConfiguring the Meter’s Gateway Card for Network Accessibility6 www.eaton.com IM02601002ELocation of Gateway CardThere are four indicator LEDs on the Gateway Card labeled: Status, DHCP, Ident, andPower When power is first applied all the lights should be off for a few seconds andthen the Power light will illuminate This indicates the card has power and is runningConfiguring the Meter’s Gateway Card for Network AccessibilityConfiguring a Fixed IP Address for the Gateway Card using a local PCYour network administrator provided an IP address, a subnet mask, and a default gate-way (which you entered in the previous section) This information must be entered intothe Gateway Card using a local PC, such as a laptopThis method requires a PC with the following:• an Ethernet port• an Ethernet cable (either straight-through or cross-over)• A web browser such as Internet Explorer 7 or 8• an installed version 6 or later JAVA J2SE JRE (Java Runtime Environment) If notalready installed you may download it from www java com and install it (If Java isn’tinstalled, you’ll be prompted to install it )To configure the Gateway Card:1 On the PC, launch the Java Control Panel screen (available through the Windows