Eaton Xpert Meter 2000 Series Quick Start Manual

Also see for Power Xpert Meter 2000: Quick start guide User guide Quick start guide Instructions

PXM 2000 Quick Start GuideConfiguring the Meter’s Gateway Card for Network AccessibilityIM02601002E www.eaton.com 7Control Panel)2 On the General tab, click the Settings button under Temporary Internet Files3 Ensure the Keep Temporary Files on My Computer check box is cleared4 Connect the PC to the Gateway Card through an Ethernet cable (either a straightthough or cross-over CAT 5 cable)There are two green lights (LEDs) located on the gateway card’s Ethernet port If theEthernet cable is connected to an active Ethernet port on the PC both lights shouldbe illuminated (the light labeled Act may be flickering reflecting network activity)5 The card’s default Ethernet IP address is 192 168 1 1 Set the PC’s address to anaddress on the same subnet, such as 192 168 1 100 To do this, use the followingsteps:a Click Window’s Startb Choose either Settings > Control Panel (Windows 2000) or Control Panel(Windows XP)c In the Control Panel, click Network Connections and right-click Local AreaConnection Select Properties from the shortcut menud Click the Properties buttone In the Properties dialog box, select Internet Protocol (TCP/IP) and click theProperties buttonf In the Internet Protocol (TCP/IP) Properties dialog box, select Use the follow-ing IP address and enter the following in the IP address field: 192.168.1.100g Click OK throughout the various dialog boxes6 Launch a web browser and navigate to the following IP address: 192.168.1.1If an information screen appears stating the certificate cannot be verified and askingif you want to run anyway, select run.Loading PageJava will load and then the meter’s Home page will appear

/ 12

Related manuals for Eaton Power Xpert Meter 2000