Echo CS-310 Operator's Manual

Also see for CS-310: Instruction manual Instruction manual Instruction manual Operator's manual Operator's manual

Echo CS-310 Operator's Manual Manual pdf 12 page image

12 X7503274200© 11/2014 ECHO Inc.EMISSION CONTROL (EXHAUST / EVAPORATIVE) CS-310Manual Safety Symbols and Important InformationThroughout this manual and on the product itself, you will find safety alerts and helpful, informationalmessages preceded by symbols or key words. The following is an explanation of those symbols and keywords and what they mean to you.The safety alert symbol accompanied by the word “DANGER” calls attention to an act or conditionwhich WILL lead to serious personal injury or death if not avoided.The safety alert symbol accompanied by the word “WARNING” calls attention to an act or conditionwhich CAN lead to serious personal injury or death if not avoided.The safety alert symbol accompanied by the word “CAUTION” calls attention to an act or conditionwhich may lead to minor or moderate personal injury if not avoided.The enclosed message provides information necessary for the protection of the unit.Note: This enclosed message provides tips for use, care and maintenance of the unit.CIRCLE AND SLASH SYMBOLThis symbol means the specific action shown is prohibited. Ignoring these prohibitions can resultin serious or fatal injury.EMISSION CONTROL (EXHAUST / EVAPORATIVE)EPA 2010 and LaterThe emission control system for the engine is EM (engine modification)and, if the second to last character of the Engine Family on the EmissionControl Information label (sample below) is “C”, “K”, or “T”, the emissioncontrol system is EM and TWC (3-way catalyst). The fuel tank/fuel lineemission control system is EVAP (evaporative emissions). Evaporativeemissions for California models are only applicable to fuel tanksAn Emission Control Label is located on the engine. (This is anEXAMPLE ONLY, information on label varies by engine FAMILY).Product Emission Durability (Emission Compliance Period)The 50 or 300 hour emission compliance period is the time spanselected by the manufacturer certifying the engine emissions outputmeets applicable emissions regulations, provided that approvedmaintenance procedures are followed as listed in the MaintenanceSection of this manual.