Echo CS-310 Operator's Manual

Also see for CS-310: Instruction manual Instruction manual Instruction manual Operator's manual Operator's manual

Echo CS-310 Operator's Manual Manual pdf 15 page image

CS-310 DESCRIPTION© 11/2014 ECHO Inc.X7503274200 15Preparation For UseSaw chain is sharp! Always wear gloves when handling assembly, otherwise serious personal injurymay result.Note: The machine may be delivered with guide bar, tip guard, andsaw chain separated. Install guide bar, tip guard, and sawchain as follows.Tip Guard to Bar InstructionsTools Needed: Two 11 mm (7/16 in.) Wrenches. For saws with tipguard P/N 2894901 and Symmetrical or AsymmetricalLow-Kick type (Double Guard) guide bars.1. Install bolt (A) in rear hole (B) of tip guard and through fronthole (C) in guide bar.2. IMPORTANT: Dimple (D) in tip guard must engage recess (E)in guide bar.3. Securely tighten nut (F) and bolt (A).Guide Bar and Saw Chain Installation/Removal1. Release the cylinder cover latches, and remove the cylindercover.2. Remove spark plug lead.3. Remove sprocket guard nuts (A) and remove sprocket guard(B).4. Remove guide bar and saw chain if necessary.Note: See “Maintenance and Care” section for guide bar/saw chainmaintenance procedures.For more informationscan this QR code.ABCDEFFor more informationscan this QR code.AB