31 SRM-2305/2305SIENGLISHDEUTSCHITALIANO1 OPERATOR’S MANUAL Included with unit. Readbefore operation and keep for future reference tolearn proper, safe operating techniques.2 ANGLE TRANSMISSION Having two gears to changethe angle of rotating axis.3 CUTTING ATTACHMENT Nylon line head for cuttinggrass and weed.3(U) CUTTING ATTACHMENT 3 cutter blade for cuttinggrass, garden debris and weeds.4 SHIELD Device to protect the operator from accidentalcontact with the cutting head and thrown objects.5 CUT OFF KNIFE Cut nylon line to adjust line lengthto proper swath. Attach to guard plate used with nylonline cutter.6 SHAFT TUBE Part of the unit that provides a casingfor power transmission shaft.7 LOOP-HANDLE Light weight, suitable for Nylon linetrimmer.7(U) U-HANDLE Having the configuration of a bicyclehandle bar to reduce working effort compared to aloop-handle.8 SUSPENSION POINT Device on which the harnesscan be hooked.9 IGNITION SWITCH “Slide Switch” mounted on top ofthe Throttle Trigger Housing, move switch forward toRUN, backward to STOP position.9(U) IGNITION SWITCH “Slide Switch” mounted on top ofthe Throttle Trigger Housing, move switch upward toRUN, downward to STOP position.10 THROTTLE TRIGGER Activated by the operator’sfinger for controlling the engine speed.11 THROTTLE TRIGGER LOCKOUT Locks throttletrigger in the idling position until you have a propergrip with your right hand around the handle.12 AIR CLEANER COVER Covers air filter.13 FUEL TANK CAP For closing the fuel tank.14 FUEL TANK Contains fuel and fuel filter.15 STARTER HANDLE Pull handle to start the engine.(SRM-2305SI ; START)16 SILENCER COVER Cover the silencer not to makeoperator touch to hot surface of silencer.17 SPARK PLUG18 SHOULDER HARNESS An adjustable strap tosuspend unit.19 RETAINING PARTS20 SHOULDER HARNESS An adjustable straps tosuspend unit.21 HIP PAD To protect hip/leg and clothing.22 BLADE COVER When transporting the unit, use theappropriate metal blade cover.23 SAFETY DECAL Part number 890617-43130GB (See page 30)DESCRIPTION