Eclipse EC-P50 User Manual
Also see for EC-P50: Installation manual
                                                | |
Contents
| 
P0016-LU-03.01 15Test Bell & Outputs - 12*This option allows the bell, strobe and any outputs that have the “User Test” attribute to beswitched on and off so that the devices connected to them may be tested. Normally the belland strobe outputs are connected to an external sounder unit.To test the bell and strobe, please proceed as follows:UrUser Menu:--12: Test BellOutput Test 1-4:Enter your access code .????Use the following keys to toggle output:= Bell Output= Strobe Output= User Test Outputs= Alarm Soundere.g. Enter 1234 to select all.1234OtRepeat step 3 to toggle outputs on or off.When finished press to exit the menu.REnter 12* to select Bell TestOtOutput Test 1-4:Strobe ActiveOutput Test 1-4:Bell ActiveEnter or to exit the user menu.99* RUser Menu:--01: Stay Arm 1 UrStOutput Test 1-4:User Test ActiveBEUTOutput Test 1-4:User Test Active ALOnly the outputs that have been programmed by your installer are activated duringthe “User Test Outputs” option. |
Related manuals for Eclipse EC-P50
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine