Eclipse EC-P50 User Manual
Also see for EC-P50: Installation manual
                                                | |
Contents
| 
30 P0016-LU-03.01User SetupThis section covers programming of the system users. The EC-P50 has a total of 51 users:f User 00 is the “Engineer” which cannot be selected or changed by the master user.f User 01 is the “Master” user which has a default code of 5678.f Users 02 to 50 can be programmed to any user type and default to “Not in Use”.When setting up a new user for the system the user must be assigned an access code, usertype, areas and optionally a time lock and name.User Access CodeEach user must be assigned an access code in order to operate the system; access codesmay be 4, 5 or 6 digits in length.To program a User Access Code, please proceed as follows:User 02 Code:ÿUser 02 Code:020202ÿEnter option number:: Where ?? is user 01 to 5081??Then press to edit.e.g. Enter 8102* for User 02.*Ensure that User Program Mode is selected.User Menu:--Option:----Enter new access code,e.g, “020202”.Press to accept and return to step .Press to cancel and return to step .Press to accept and move to next option.*R#ÌËUr81 02 =81 02 =0 20...If the remote keypad generates an error tone after pressing the * or # key atstep 3, then the access code cannot be used. Simply repeat the procedure fromstep 2 but use an alternative access code at step 3. |
Related manuals for Eclipse EC-P50
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine