Eclipse EC-P50 User Manual
Also see for EC-P50: Installation manual
                                                | |
Contents
| 
P0016-LU-03.01 29Speech Dialler Telephone NumbersThe onboard communicator also features a 4 channel speech dialler which can be used tocall landline or mobile telephones to play a recorded voice message. Each channel can havetwo telephone numbers assigned. When the channel is triggered the onboard communicatorwill dial the number specified by the dial sequence and play the voice message associatedwith the channel for up to 1 minute. Pressing the [#] key on the telephone handsetacknowledges the call and stops the dial sequence, pressing any other key alsoacknowledges the call, but the dial sequence will continues with next number.To program the Speech Dialler Telephone Numbers, please proceed as follows:Channel 1 Tel No.2:ÿChannel 1 Tel No.2:012355667788ÿEnter option number:: Channel 1 - Tel No. 173117312731373147321732273237324 *: Channel 2 - Tel No. 1: Channel 3 - Tel No. 1: Channel 4 - Tel No. 1: Channel 1 - Tel No. 2: Channel 2 - Tel No. 2: Channel 3 - Tel No. 2: Channel 4 - Tel No. 2Then press to edit.e.g. Enter 7321* for Channel 1 Tel No 2.Ensure that User Program Mode is selected.User Menu:--Option:----Enter telephone number,e.g, “012355667788”.Press to accept and return to step .Press to cancel and return to step .Press to accept and move to next option.*R#ÌËUr73 21 =73 21 =0 12...The speech dialler feature must be enabled and configured by your installer. Eachchannel will be assigned to an event type, e.g. channel 1 could be assigned to the“Fire Alarm” event and channel 2 to the “Intruder Alarm” event. |
Related manuals for Eclipse EC-P50
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine