Ecom i.roc Ci70-Ex Manual
Also see for i.roc Ci70-Ex: Instructions
                                       | |
Contents
| 
40 41Note:When you restore default settings in Intermec Settings, only the settings for visibleitems are restored to defaults� The settings for hidden menu items are not affected�Use Intermec Settings Remotely With SmartSystems FoundationYour mobile computer is SmartSystems-enabled, which lets you open Intermec Settingsfrom the SmartSystems console to remotely configure all of your mobile computers. Formore information on SmartSystems, see Manage the Computer Using SmartSystemsFoundation” on page 98�1 In the SmartSystems console, select a mobile computer and right-click�2 From the menu, select Intermec Settings�3 Configure the settings you need to change. As you choose parameters fromthe tree structure, help for each parameter appears in the upper right paneof Intermec Settings�4 When you are done making changes, choose File > Save Settings�For help using Intermec Settings, click Help > Contents� For information on all of the pa-rameters in Intermec Settings, see the Intermec Settings Command Reference Manual�About Network CommunicationsYou can easily add the mobile computer to your wireless or wired data collection net-work� You can connect your computer using:• 802.11a/b/g/n radio communications.• Ethernet communications.• Bluetooth communications.• USB and serial communications.Configure 802.11a/b/g/n (Wi-Fi) Radio CommunicationsMake sure all components with antennas are at least 30 cm (1 ft) apart whenpower is applied� Failure to comply could result in equipment damage�The mobile computer contains an 802�11 radio to transfer data using wireless com-munications and to support the TCP/IP network protocols� This section of the manualassumes that your wireless network is set up, including your access points� By default,the 802�11 radio is disabled� Use the following procedure to enable the Wi-Fi radio usingIntermec Settings�1 Tap Start > Settings > System > Intermec Settings�2 From the Intermec Settings main menu, tap Communications>802�11 Radio> Radio Enabled�3 Select the Radio Enabled check box and tap OK� By default, the computeruses Funk security and enables DHCP�4 Use Intermec Settings to configure any other parameters you need to usefor communication with your network�5 Configure 802.11 security. For help, see “About Wireless Security”on page 44�Configure Bluetooth CommunicationsYour mobile computer is Bluetooth™-enabled, which lets you connect to other Blue-tooth devices, such as scanners, printers, or audio devices� You need to turn on theBluetooth radio before you can discover and connect to other Bluetooth devices� Bydefault, the radio is turned off. You can configure Bluetooth communications usingIntermec Settings or from the Start menu�1 Tap Start > Settings > Intermec Settings >Communications > Bluetooth�2 Select the Turn on Bluetooth check box�3 (Optional) If you want your computer to bevisible to other Bluetooth devices, choose“Discoverable”�4 Tap OK�The Bluetooth radio maintains its state through a reboot or cold boot and maintainsvirtual COM ports� But, if you clean boot your computer you need to recreate pairingsto devices�Connect to a Bluetooth ScannerYou can connect the computer to an Intermec Bluetooth scanner, such as the SF51 or SR61�1 Tap Start > Settings > System > WirelessScanning�2 Tap Add Device� |
Related manuals for Ecom i.roc Ci70-Ex
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine