Ecom i.roc Ci70-Ex Manual
Also see for i.roc Ci70-Ex: Instructions
                                       | |
Contents
| 
10 11About the Status LEDsUse the following illustrations and table to understand the status LEDs on your com-puter� All six status LEDS are not available on every i�roc® Ci70 -Ex computer� For ex-ample, the QWERTY versions of the i�roc ® Ci70 -Ex do not have a green key status LED�Location of the i.roc ® Ci70 -Ex Status LEDsGreen keystatus LEDShift keystatus LEDOrange keystatus LEDBattery status LEDNotification LEDGood Read and Ready-to-WorkStatus LEDStatus LED DescriptionsLED Color DescriptionNotification Amber This LED is user-programmableGood Read Green The computer successfully decoded a bar code�Ready-to-Work Blue If you have Intermec Terminal Emulator (ITE), the application is runningand connected to the host�If you do not have ITE, you can configure the Ready-to-Work indicator toturn on or off to indicate a healthy state�BlinkingblueITE is running but not connected to the host�The computer is unhealthy�Off ITE is not installed or not running�The computer is healthy�Battery See “About Battery Status” on page 12�Key Status Green The Green function key is enabled�Orange The Orange function key is enabled�Shift Red The Shift key is enabled�About Language ProvisioningIf your i�roc® Ci70 -Ex computer includes language provisioning, you are prompted toselect a language provision when the computer starts for the first time. It may take upto 15 minutes to load your language�Make sure you select the correct language before you tap Provision� If you need to havethe language provisioning changed, you will need to send your computer to an ecominstruments Global Repair Center�About the Battery LThe computer uses following rechargeable Lithium-ion battery pack as the main powersource:• 3.7 V, 4000 mAH (14.8 Wh) battery AM Ci70 -ExLThe battery used in this device may present a fire or chemical burn hazard if it is mis-treated� Do not disassemble it, heat it above 60 °C (140 °F) or incinerate it� Dispose ofused batteries promptly� Keep away from children�Charge the BatteryYou need to fully charge the battery before using your computer for the first time.Change the BatteryIf your battery power is low, you need to either charge the battery in the computer, orreplace it with a charged battery�1 Save your files and close any open applications.2 Press the Power button and choose Shutdown from the menu to shut downthe computer�3 Detach the handstrap from the computer�Detaching the Handstrap from an i.roc® Ci70 -Ex4 Make sure the computer is in standby mode and that the screen has turned off�5 Remove the battery�Unscrew the battery‘s screw using enclosed screwdriver� Lift lower part of thebattery to release it from the computer� |
Related manuals for Ecom i.roc Ci70-Ex
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine