Faittoo FT-AVR2204H User Manual
Also see for FT-AVR2204H: Manual
                                                                | |
Contents
| 
Faittoo ® HD Hybrid 5 in 1 DVR Manual V1.2 http://www.faittoo.com service@faittoo.comFigure 4-202) Click the mouse to select the channel Number (1~16). It needs to be backed up. To back up allchannels select " All".3) The mouse needs to check backup record mode, / manual / time / move / alarm, system alltypes of video defaulted.4) To modify the start time required to backup video files, click "search".5) After the retrieval is completed, check the backed-up file. If progress bar "Video Backup" is100%, backup was successfull.Illustration● If USB does not have enough space, backup will fail● Check the files to be backed up● Backup with USB device must be FAT32 format4.10 Color AdjustOperation Procedure:1) Mouse click and drag the control channel to adjust hue, brightness, saturation and contrast.2) Adjust three states: Default, bright, soft, as shown:Figure 4-21Illustration● setup a channel parameter is completed, can be set via a button " Copy to " all channels● If only one channel is set, double-click into the channel, right mouse click to select "Channeladjustment ". Click "Channel adjust" is defaulted into the first passage4.11 Channel mode (See section 4.4)4.12 PTZ ControlPTZ control supports two modes: RS485 and UTC coaxial control4.12.1 RS485 ModeFirst connect the PTZ CAMERA and DVR's RS485 port with the positive wire to positive wire andnegative wire to negative wire (Note: Do not reverse the positive and negative wires).24 |
Related manuals for Faittoo FT-AVR2204H
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine