Faittoo FT-AVR2204H User Manual
Also see for FT-AVR2204H: Manual
                                                                | |
Contents
| 
Faittoo ® HD Hybrid 5 in 1 DVR Manual V1.2 http://www.faittoo.com service@faittoo.comThen set the PTZ CAMERA and DVR with same Protocol, Baud rate, Address code.For example, PTZ CAMERA Protocol is “Pelco-D”, Baud rate is “2400”, Address code is “1”, and connectthis PTZ CAMERA to DVR's Channel 1, the DVR setting will be shown as below:Right- click into the "System Setup" - > "Channel Setup" - > " PTZ Setup"Figure 4-22Then click “?” into the PTZ control interface, See section 4.12.3.4.12.2 UTC coaxial controlIn UTC coaxial control mode, PTZ camera must support UTC function, the camera through the coaxialcable connected to the DVR VIDEO IN, and set it as shown below:Figure 4-234.12.3 PTZ controlOperation Procedure:1) Right-click the shortcut menu bar " PTZ Control" to enter its control interface as shown below:Figure 4-242) To adjust PTZ direction, click the " Up / Down / Left / Right " arrow keys3) Click the " zoom/focus/iris " to adjust image scaling/focus/ image brightness. The premise is PTZcamera can support Zoom, Focus and Iris4) UTC Menu: When you connect PTC camera through the UTC coaxial control, click UTC MENU toset the camera's menuIllustration● If you want to control one channel’s PTZ, double-click into the channel, right mouse click toselect "PTZ Control". Click " PTZ Control" is defaulted to enter the first channel.Select UTCAddress codeProtocolBaudrateSelect RS485Select Channel 125 |
Related manuals for Faittoo FT-AVR2204H
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine