Faittoo FT-AVR2204H User Manual
Also see for FT-AVR2204H: Manual
                                                                | |
Contents
| 
Faittoo ® HD Hybrid 5 in 1 DVR Manual V1.2 http://www.faittoo.com service@faittoo.comFigure 4-272) Channel, protocol, baud rate and other parameters can be adjusted.3) After the adjustment, click " ? " to enter the following:Figure 4-284) Click the " Up / Down / Left / Right " arrow keys to adjust the PTZ preset position, rightmouse click to back to the original interface after adjustment.5) Adjustable hold time, after the adjustment, click "Store" Preset.6) Repeat steps 2, 3, 4 presets, after all the setups, click " ? " To enter.7) Check " Tour start ," PTZ start cruising.Illustration● Only one channel is set by operation above, if you want to cruise another channel, choose "Copyto All" and operate one-button add.4.13 Record function4.13.1 Manual RecordOperation Procedure:1) Left-click on the shortcut menu bar "Manual Record" to enter the setup interface shown below:Figure 4-292) Mouse click to select the required video channel. "☑" means open. "□" means closed.3) Click "OK " button to exit after setup completion and start recording.27 |
Related manuals for Faittoo FT-AVR2204H
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine