Faittoo FT-AVR2204H User Manual
Also see for FT-AVR2204H: Manual
                                                                | |
Contents
| 
Faittoo ® HD Hybrid 5 in 1 DVR Manual V1.2 http://www.faittoo.com service@faittoo.com4.14.3.1 Record planFor more detail refer to “4.13.2 Record Plan”4.14.3.2 Sensor Setup (Not available)4.14.4 Network Setup4.14.4.1 Network setupOperation steps:Right click the main menu“System Setup”→“Network setup”, then get setting interface as below:Figure 4-46Detailed functions:Function Type Description RemarkDHCP Automatically obtain IP, If choosing this function,users get IP address of the device automatically,otherwise it is set manually.If choosing this function,users can’t change IPaddress.Cloud(P2P) To show Cloud ID of the device. Failure to connect thenetwork will show “offline”.IP address For displaying IP address of the device. If userswant to change IP address, they can manuallyenter the IP address.The default IP address is192.168.1.114Subnet Mask For dispalying the subnet mask of the device.Gateway For displaying the device's gateway address.MAC Address For displaying the hardware address information ofthe device.Preferred DNS Set to be consistent with the router's DNSWeb Port For setting web port, which is used for datatransmission when remote monitoring. When thisport is disabled or occupied, users have to changethis value.Cloud(P2P) To show Cloud ID of the device. Failure to connect thenetwork will show “offline”.Network status It is used for show Network status39 |
Related manuals for Faittoo FT-AVR2204H
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine