Faro FOCUS3D X 130 User Manual

Also see for Focus 3D X 130: Training manual

Contents

Faro FOCUS3D X 130 User Manual Manual pdf 35 page image

FARO® Laser Scanner Focus3D X 130 ManualJanuary 201427Chapter 5: Getting StartedChapter 5: Getting StartedThis chapter will provide preliminary steps and basic Focus 3D X 130 operationsand will guide you step-by-step from setting up the Focus3D X 130 to recordingyour first scan.Charging the FARO PowerBlock BatteryThe FARO PowerBlock battery can be charged in the Focus 3D X 130 or in theFARO PowerDock battery charger. Carefully read the safety measures describedin “PowerBlock Battery Safety Measures” on page 11 and “PowerDock BatteryCharger Safety Measures” on page 12 before using them.It is recommended to fully charge the battery before use and that a spare batteryis kept on hand just in case it is needed during your scan project.Charging the Battery in the Focus3D X 130The Focus 3D X 130 doesn't need to be switched on in order to charge the battery.1 Mount the battery into the Focus 3D X 130. See “Supplying Power with theBattery” on page 33.2 Connect the AC Adaptor to the Focus3D X 130 and the wall outlet. See“Supplying Power with the External Power Supply Unit” on page 34.3 If the Focus 3D X 130 is turned off, the upper LEDs on both sides of the scanneras well as the LEDs at the scanner mount will start blinking slowly blue whilecharging. The LEDs will stop blinking and will illuminate constantly bluewhen the battery is fully charged.4 If the Focus 3D X 130 is turned on, you can check the exact charge state of thebattery in the scanner's user interface under Home > Manage > GeneralSettings > Power Management. For more information, see “PowerManagement” on page 81.P LEASE NOTE:• Take out the Focus 3D X 130 from the transport case before connecting thepower supply to the scanner.• Use the power supply unit indoor only.• Before longer storage, remove the power supply unit and the battery from theFocus 3D X 130.