FARO® Laser Scanner Focus3D X 130 ManualJanuary 201472Chapter 6: The Focus3D X 130 Controller SoftwareNo Parent Project - Select this button if the project is supposed to be a mainproject with no parent project.Customer - If you are carrying out the scan project by order of a company, youcan enter its name here.File Base Name - The scan will be saved with a file name consisting of this basename followed by the current scan number.Initial Scan No. - Automatically increments with each successive scan. Can bereset and may be used to indicate the number of scans per scan session.Additional Info - Additional project information.Latitude [°] - If known, enter the approximate (+/- 10° is sufficient) latitudeposition of the scan project here. This information helps to improve thecalibration of the inclination sensor and leads to more precise inclination data andthus to better scan registration results. Please enter the latitude value in decimaldegree notation.Editing a Scan ProjectTo edit a scan project, select it in the list and touch it once again to reach to itsdetails view.Selecting a Scan ProjectThe project list contains the currently selected project and all further projectsstored on the SD card.Figure 6-11 Project List
