8 - 14 • The Control PanelSubmenuPrint Control(five submenus)Darkness: Controls the overall darkness ofthe page.TonerMiser: Lets you use less toner, but witha reduction in image quality.Smoothing: Reduces the jagged appearanceof text and graphics.Print Cal. Pages (1200 dpi only): Printsa series of pages to be used in conjunction withthe Calibration menu.Calibration (1200 dpi only): A range ofsettings corresponding to the pages printedusing the Print Cal. Pages menu command.SettingsDarkest, Darker, Normal,Lighter, or Lightest.Enabled or Disabled.Enabled or Disabled.Press the Enter key to start theprocess.Calibration 1 - Calibration 5. Thedefault setting is set at thefactory, and is different for eachprinter.NotesCannot be used if either Smoothing is enabledor print resolution is 1200 dpi.Cannot be used if either Toner Miser is enabledor print resolution is 1200 dpi.You should examine the output and choose thepage that looks best overall.If necessary, change this setting to the Calibra-tion number of the page that looks best (fromthose printed using the Print Cal. Pages menucommand above).9. Print Control – press the Enter key to access the submenus.Page TypeConfiguration: A list of the control panelsettings for each menu and submenu.Font List: The resident fonts and anydownloaded fonts.Help: A diagram of the control panel menusystem.Sample: Common graphics formats andelements, and different fonts and sizes.SettingsPress the Enter key to print theConfiguration page.Press the Enter key to print theFont list.Press the Enter key to print theHelp page.Press the Enter key to print theSample page.NotesThis page only prints if the PS/PCL sensingmenu is set to Auto Switch or PS only.The list of fonts you will see depends on thesetting of the PS/PCL menu. Auto Switchshows all resident fonts, PS Only shows onlyresident PostScript fonts, and PCL Only showsonly resident PCL fonts.This page only prints if the PS/PCL sensingmenu is set to Auto Switch or PS only. Menusand submenus will appear dimmed if youcannot select them because of other menusettings (for instance, the PCL menus will bedimmed if you have set the PS/PCL menu to PSonly).This page only prints if the PS/PCL sensingmenu is set to Auto Switch or PS only.8. Info Pages – The info pages menu lets you print four different pages of information.Press the + or - keys to access each individual page type. Press the Enter key to print the pageyou select. The printer will temporarily go online, print a page, and then go back off line tothe menu.
