9 - 10 • Fontsn Utilities menu functionsChoose:Name Printer to rename your printer.Set Startup Page to turn the printer’s start page On or Off. This option correspondsto the Start Page submenu in the front panel of your GCC printer. For example, ifyou turn off the start page in the LaserWriter Utility, the Start Page option in thedisplay window on the front panel will be set to Disabled. (The printer’s default isEnabled.)Get Page Count to display the total number of pages printed by your GCC printer.Download PostScript File to send a PostScript file directly to the printer.Restart Printer to restart the printer between print jobs. This is useful for clearingdownloaded fonts from the printer’s memory and is preferable to switching theprinter off and on again, as it will not interrupt another print job.Downloading fonts from Windowsn Type 1 fontsType 1 fonts are automatically downloaded to the printer. These fonts are deletedfrom the printer’s RAM when the print job is complete. However, you may want tokeep downloaded fonts in the printer’s RAM for successive print jobs. To maintainType 1 fonts in the printer’s RAM, manually download the fonts using the fontdownloading utility included with your Type 1 font package. Manually downloadedfonts remain in the printer’s RAM until you switch off your GCC printer.Note: If your normal routine is to download several fonts to the printer, it is a goodidea to adjust the Windows printer driver’s virtual memory setting so that it canbetter process your documents. Perform the procedure after you have downloadedyour normal set of fonts to the printer.n TrueType fontsWhile you can download TrueType fonts to your GCC printer, Windows does notrecognize TrueType fonts as resident fonts. Therefore, the TrueType fonts will still bedownloaded from the PC at print time.
