4 - 14 • Using Windows 953. Click on the folder name win95.4. Click OK to accept this folder. You will see a file name similar towin95_15.cab.5. Click OK again to accept this file name.6. Click OK in the Copying Files dialog box.7. The installation will continue. Go back to step 16 in the installation instruc-tions.Exploring the Properties dialog boxNow that you have installed the printing software in Windows 95, there are a num-ber of settings that you may need to change if you have special printing require-ments. Most users will not need to make any changes here.Most of the Properties dialog box contains options that are the same for all printersusing Windows 95, so this section of this installation guide only covers the optionsprovided by GCC. If you want information on options for all Windows 95 printers,refer to the Windows 95 on-line help system and Windows 95 documentation.The changes you make in the Properties dialog box affect all applications, but on thiscomputer only.If you do not already have the Properties dialog box displayed:1. Click on the Start button. You will see the Start menu.2. Choose Settings, then choose Printers from the submenu that appears.3. You will see the Printers window. Use the right mouse button to click onthe Elite XL 20ppm icon, and choose Properties from the pop-up menu.The Properties dialog box has tabs across the top. Click on the tabs to see other pages.Each page has options to configure your printer.If you configured your printer as a local printer, you will see a tab called Sharing. Ifyou configured your printer as a network printer, the Sharing tab is replaced by aCapture Settings tab. Otherwise the tabs are the same.You use Sharing if you want to share your printer and files over a network. This pageof the dialog box is the same on all Windows 95 computers; further details can befound in the Windows 95 on-line help and documentation.If you configured the printer for a network, you have already made the necessarychanges to the Capture Settings page.
