6 - 6 • Using Windows NT 4.04.0 printers, please refer to the Windows NT 4.0 on-line help system and WindowsNT 4.0 documentation. You can also get information about an item in a dialog boxby clicking on the question mark button at the top right of most dialog boxes.The changes you make in the Properties and Document Default dialog boxes affectall applications, but on this computer only.The Properties dialog boxIf you do not already have the Properties dialog box displayed:1. Click on the Start button. You will see the Start menu.2. Choose Settings, then choose Printers from the submenu that appears.3. You will see the Printers window. Use the right mouse button to click onthe Elite XL 20ppm icon, and choose Properties from the pop-up menu.The Properties dialog box has tabs across the top. Click on the tabs to see other pages.Each page has options to configure your printer.The Device Settings pageClick on the Device Settings tab to see the Device Settings page. This page containssettings specific to your GCC printer model.In the Printer features box you will see options specific to your printer. If you wantto change the current setting of any feature, click on its name in the upper box. Youwill see settings in the “Change setting” area below. Click on the setting you want tochange.Note: The features you see in the list vary between printer models. The ConfigurationPage has details of the specific features in your printer.If you add options (like more paper trays or extra printer RAM), you need to changethe Installable options list. After you have changed this option, Print dialog boxes inthis computer’s applications will show extra paper trays, for example.Note on VMOption: The VMOption selection corresponds to the amount of RAMinstalled in the printer. If you add or subtract printer memory, you will need tochange the amount shown under VMOption. If memory was added to your printerbefore you installed the Windows NT 4.0 printer software, you will need to changethe VMOption amount.If you have to change the printer memory size, click on VMOption and select thecorrect memory size from the drop-down list box. Answer Yes to the question about
