GE 164D3333P069 Owner's Manual

47Troubleshooting TipsInstallation InstructionsCustomer ServiceOperating InstructionsSafety Information4-Wire Power Cord InstallationWARNING: The neutral wire of the supply circuitis connected to the neutral terminal located in the center of theconnector block. The power leads must be connected to the outside(brass colored) terminals. The 4th grounding lead must be connectedto the frame of the range with the grounding plate and grounding screw.Remove the 3 screws from the connector block.Remove the grounding screw and strap from the connector block middlelocation and the screw connection to the frame of the range.Insert screws through each power cord terminal ring and into connectorblock until screw engages nut. Be certain that the center wire is connectedto the center screw of the connector block. Tighten screws securely.Attach ground wire to the frame of the range.dcba5BeforeAfterNeutral terminalGround Strap(grounding to range) Grounding to rangeGroundingplateNeutral terminal