GE GFDR485GF Technical Service Manual

Also see for GFDR270EH: Dimensions and installation information Technical service guide

GE GFDR485GF Technical Service Manual Manual pdf 35 page image

35Drive BeltDrive Belt Removal1. Disconnect power from the unit.2. Remove the control panel.3. Remove the front panel.4. Remove the front drum support.DrumThe drum felt is a part of the drum and can notbe replaced separately. The drum can be installedbackward. When viewing from the front of dryer, theEDȼHZLOOVORSHIURPLWVORZHVWSRLQWRQWKHOHIWWRits highest point on the right as shown in the pictureabove.Drum Removal1. Disconnect power from the unit.2. Remove the control panel.3. Remove the front panel.4. Remove the trap duct.5. Remove the drum lamp.6. Remove the front drum support.7. Remove the belt.8. Pull the drum out from the front of the dryer.Rear Drum SupportRear Drum Support Removal1. Disconnect power from the unit.2. Remove the control panel.3. Remove the front panel.4. Remove the trap duct.5. Remove the drum lamp.6. Remove the front drum support.7. Remove the belt.8. Pull the drum out from the front of the dryer.9. Remove the rear panel.10. Remove the rear duct.See Control Panel Removal on page 20.See Front Panel Removal on page 24.See Control Panel Removal on page 20.See Front Panel Removal on page 24.See Trap Duct Removal on page 38.See LED Drum Lamp Removal on page 33.See Incandescent Drum Lamp Removal onpage 34.See Front Drum Support Removal on page 34.See Control Panel Removal on page 20.See Front Panel Removal on page 24.See Trap Duct Removal on page 38.See LED Drum Lamp Removal on page 33.See Incandescent Drum Lamp Removal onpage 34.See Front Drum Support Removal on page 34.See Rear Panel Removal on page 26.