GE GFT14 Owner's Manual & Installation Instructions

Also see for GFT14: Owner's Manual & Installation Instructions

Contents

49-90571-1 7USING THE DRYERGetting startedI Delay DryUse to delay the start of your dryer.1. Choose your dry cycle and any options.2. Press Delay Dry. You can change the delay time in 1 hour increments, using the Delay Drybutton.3. Press the Start/Pause button to start the countdown.NOTE: If the door is opened while the dryer is in Delay Dry, the countdown time will notrestart unless the door is closed and Start/Pause button has been pressed again.J Start/PausePress to start a cycle. If the dryer is running, pressing it once will pause the dryer and unlockthe door. This function can be used to add garments during a cycle. Press again to restartthe cycle.NOTE: If the dryer is paused and the cycle is not restarted within 15 minutes, the currentcycle will be cancelled.K LockYou can lock the controls to prevent any selections from being made. Or you can lock orunlock the controls after you have started a cycle.Children cannot accidentally start the dryer by touching pads with this option selected.To lock the dryer, press and hold the Temp and Level buttons together for 3 seconds.To unlock the dryer controls, press and hold the Temp and Level buttons together for 3seconds. A sound is made to indicate the lock/unlock status.The control lock icon on the display will light up when it is on.NOTE: The Power button can still be used when the machine is locked.LevelTempStartPauseL SignalWhen the light is on, the dryer will beep at the end of the cycle and every time you press abutton on the control panel.To turn the signal off, press and hold the Damp Alert and Timed Dry buttons together for 3seconds. A sound is made to indicate the lock/unlock status.DelayDryTimedDryDampAlertM Display and Status LightsThe display shows the approximate time remaining until the end of the cycle.In addition, this display will show the dryer status:Damp DelayDampDryEx DryDamp TimedClean FilterNo HeatLowHighMediumDRY DAMP COOLEst Time RemainingTumbleMy CycleEmpty TankStatus DRY DAMP COOLControls locked on.End of cycle signal on.Clean Filter Time to clean the filter. See the Care and Cleaning section.Empty Tank Time to empty the water tank. See the Care and Cleaning section.Temp Shows High, Medium, Low or No Heat temperature setting selected.Level Shows Extra Dry, Dry or Damp dryness setting selected.Damp Alert Indicates Damp Alert is set and will sound when the clothes have dried to a dampdryness level.Timed Indicates that a Timed Dry cycle is set. Will turn off after cycle is finished.Est TimeRemaining Display shows the estimated time remaining until set cycle is completed.My Cycle Indicates the My Cycle feature is set.Ext Tumble Indicates the Extended Tumble feature is set.Indicates Delay Dry is set time is selected.