GE GHDA690P02BB Installation Instructions Manual

Installation PreparationPARTS SUPPLIED:[] Two #8 Phillips flat headwood screws, 5/8"longto secure dishwasher to underside of countertop(in literature package).2 Wood ScrewsMATERIALS YOU WILL NEED :[] Ferrule, compression nut and 90°Elbow (3/8"NPTexternalthread on one end, oppositeend sizedto fit water supply)[] Thread seal tape[] UL Listed wire nuts (3)Materials For New Installations Only:[] Air gapfor drain hose, if required[] Waste tee for house plumbing, if applicable[] Electrical cable or power cord, if applicable[] Screw type hose clamps[] Strain relief for electrical connection.[] Hand shut-off valve[] Water line 3/8"min. copper[] Couplerfor extending drain line, if applicable9O°Elbow,Ferrule andCompressionNutHandShut-OffValve ThreadSealTapeWaste TeeElectrical Cable(or Power Cord,if applicable)Air GapScrew Type Strain ReliefHose ClampsWire Nuts (3)Hot Water lineCouplerTOOLS YOU WILL NEED: _ and1/4__...5/16"[] Phillips head screwdriver Ph __-,__[] 5/16"and 1/4"nutdriver Head _ Nutdriver[] 6"Adjustable wrench Screwdriver[] Level[] Carpenters square 6"Adjustable[] Measuring tape _ _nch[] Safety glasses[] Flashlight Flashlight[] Bucket to catch water when flushing the line[] GlovesFor New Installations Only:[] Tubing cutter Safety Glasses[] Drill and appropriate bits Bucket[]Holesawset _Hole Saw SetGlovesLevelTubingCutterCarpentersSquareMeasuring Tape