18Safety InstructionsOperating InstructionsCare and CleaningTroubleshooting TipsCustomer ServiceHow to Delay the Start of Cleaning (on some models)Make sure the clock shows the correcttime of day.Latch the door.Turn the Oven Temperature knobtoCLEAN.Press theSTART TIME pad.Press theHOUR andMIN. pads to setthe time cleaning will start.When theLATCH DOOR light flashes, slidethe latch handle to the left as far as it willgo and turn the Oven Temperature knobtoOFF.Using the self-cleaning oven.Never force the latch handle. Forcing the handle will damage the door lock mechanism.After a Clean CycleYou may notice some white ash in theoven. Wipe it up with a damp cloth afterthe oven cools.If white spots remain, remove them with a soap-filled steel wool pad and rinse thoroughly with avinegar and water mixture.These deposits are usually a salt residuethat cannot be removed by the cleancycle.If the oven is not clean after one cleancycle, repeat the cycle.n You cannot set the oven for cookinguntil the oven is cool enough for thedoor to be unlatched.n While the oven is self-cleaning, you canpress theCLOCK pad to display the timeof day. To return to the cleancountdown, press theCOOK TIME pad.n If the shelves become hard to slide,apply a small amount of vegetable oil orcooking oil to a paper towel and wipethe edges of the oven shelves with thepaper towel.