GE JBP80 Use And Care & Installation Manual

Also see for JBP90: Owner's manual Installation instructions Owner's manual Use and care & installation guide Owner's manual

GE JBP80 Use And Care & Installation Manual Manual pdf 14 page image

SURFACE CONTROLS(continued)Dual Surface Unit Switch (Glass Cooktops Only)The right front surface unit has2 cooking sizes to select from soyou can match the size of the unitto the size of the cookware youare using.CIED00To use the large (9 inch) surfaceunit, push in the right portion ofthe COIL SIZE switch next to thecontrol knob.To use the small (6 inch) surfaceunit, push in the left portion of theCOIL SIZE switch,6“ 9“Hot Surface Indicator Light (Glass Cooktops only)A “HOT SURFACE” light will glow brightly whenany halogen/radiant element is turned on, and willremain lit after the unit is turrmd off until the surfaceis cool enough to touch. Each element has its own“HOT SURFACE” indicator light.. It comes on instantly when the unit is turned on.“ [t stays on even after the unit is turned off.l It glows brightly until the unit is safe to touch.SURFACE COOKWARE TIPS(Electric Coil models only)CookwareUse medium- or heavy-weight cookware. Aluminum RIGHTcookware conducts heat faster than other metals.Cast-iron and coated cast-iron cookware are slow toabsorb heat, but generally cook evenly at low tomedium heat settings. Steel pans mayr cook unevenlyif not combined with other metals. -1For best cooking results pans should be ilat on thebottom. Match the size of the saucepan to the size of Not over 1 inchthe surface unit. The pan should not extend o~rer theedge of the surface unit more than 1 inch.WRONGOver 1 inch14