GE JBP80DMBB Owner's Manual
Also see for JBP80DMBB: Dimensions and installation information
                                    | |
Contents
| 
Care and cleaning of the range.Be sure all controls are off and all surfaces are cool before cleaning any part of the range.How to Remove Protective Shipping Film and Packaging TapeCarefully grasp a corner of the protectiveshipping film with your fingers and slowlypeel it from the appliance surface. Donot use any sharp items to remove thefilm. Remove all of the film before usingthe appliance for the first time.To assure no damage is done to thefinish of the product, the safest way toremove the adhesive from packagingtape on new appliances is an applicationof a household liquid dishwashingdetergent. Apply with a soft cloth andallow to soak.NOTE: The adhesive must be removed from allparts. It cannot be removed if it is baked on.If your range is removed for cleaning, servicing or any reason, be sure the anti-tipdevice is reengaged properly when the range is replaced. Failure to take thisprecaution could result in tipping of the range and cause injury.Oven VentThe oven vent is located behind the right rearsurface unit.This area could become hot duringoven use.It is normal for steam to come outof the vent, and moisture may collectunderneath it when the oven is in use.The vent is important for proper air circulation.Never block this vent.Control KnobsThe control knobs may be removed for easiercleaning.Make sure the knobs are in the OFFpositions and pull them straight off thestems for cleaning.The knobs can be cleaned in adishwasher or they may also be washedwith soap and water. Make sure the insideof the knobs are dry before replacing.Replace the knobs, in the OFF positionto ensure proper placement.22Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions |
Related manuals for GE JBP80DMBB
manualsdatabase
Your AI-powered manual search engine