GE JBS60 Owner's Manual

Also see for JB620: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

GE JBS60 Owner's Manual Manual pdf 24 page image

24 49-80689-3Lift-Off Oven DoorThe door is very heavy. Be careful when removing and lifting the door.Do not lift the door by the handle.To remove the door:1. Fully open the door.2. Pull the hinge locks down toward the door frame, tothe unlocked position. A tool, such as a small flat-blade screwdriver, may be required.3. Firmly grasp both sides of the door at the top.4. Close door to the door removal position. The doorshould be open approximately 3" with no obstructionabove the door.5. Lift door up and out until both hinge arms are clear ofthe slots.To replace the door:1. Firmly grasp both sides of the door at the top.2. Starting on the left side, with the door at the sameangle as the removal position, seat the indentation ofthe hinge arm into the bottom edge of the hinge slot.The notch in the hinge arm must be fully seated intothe bottom of the slot. Repeat for right side.3. Fully open the door. If the door will not fully open, theindentation is not seated correctly in the bottom edgeof the slot.4. Push the hinge locks up against the front frame of theoven cavity, to the locked position.5. Close the oven door.Storage Drawer RemovalTo remove the drawer:1. Pull the drawer out until it stops.2. Lift the front of the drawer until the stops clear theguides.3. Remove the drawer.To replace the drawer:1. Place the drawer rails on the guides.2. Push the drawer back until it stops.3. Lift the front of the drawer and push back until thestops clear the guides.4. Lower the front of the drawer and push back until itcloses.Removal positionHinge lockSlotPull hinge locks down to unlockPush hinge locks up to lockHingelockHingearmIndentationBottomedge ofslotHinge armStop guideRailMaintenance (Cont.)CARE AND CLEANING: Maintenance