GE JDP47 Owner's Manual

Also see for JDP47: Installation instructions Installation instructions Installation instructions Installation instructions Owner's manual

29Safety Instructions Operating InstructionsSafety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Supportwww.GEAppliances.comProblem Possible Causes What To DoOven will not self-clean The oven temperature is • Allow the oven to cool and reset the controls.too high to set a self-cleanoperation.Oven controls improperly set. • See the Using the self-cleaning oven section.“Crackling” or This is the sound of the • This is normal.“popping” sound metal heating and coolingduring both the cooking andcleaning functions.Excessive smoking Excessive soil. • Press the CLEAR/OFF pad. Open the windows toduring a clean cycle rid the room of smoke. Wait until the LOCKED lightgoes off. Wipe up the excess soil and reset the cleancycle.Oven door will not Oven too hot. • Allow the oven to cool below locking temperature.open after aclean cycleOven not clean after Oven controls not properly set. • See the Using the self-cleaning oven section.a clean cycle Oven was heavily soiled. • Clean up heavy spillovers before starting the cleancycle. Heavily soiled ovens may need to self-cleanagain or for a longer period of time.“LOCKED” flashes The self-clean cycle has been • Close the oven door.in the display selected but the door is notclosed.“LOCKED” light is on The oven door is locked • Press the CLEAR/OFF pad. Allow the oven to cool.when you want to cook because the temperatureinside the oven has notdropped below thelocking temperature.“F— and a number You have a function • Press the CLEAR/OFF pad. Put the oven back intoor letter” flash error code. operation.in the display If the function code repeats. • Disconnect all power to the range for at least 30seconds and then reconnect power. If the functionerror code repeats, call for service.