GE JGBP31GEP Use And Care & Installation Manual

Contents

GE JGBP31GEP Use And Care & Installation Manual Manual pdf 11 page image

OWN CONTROL, CLOCK Am TMER w/Clock To Set the ClockThe clock must be set for theautomatic oven timing functions towork properly. The time of daycannot be changed during a TimedBake or CLEAN cycle. n1. Press theCLOCK pad.CLOCK A 1INCREASE orDECREASE padto set the timeof day.3. Press the CLOCK padto start.Timer To Set the TimerThe timer is a minute timer; it doesnot control oven operations. Themaximum setting on the timer is 9hours and 55 minutes.o1. Press the pad.TIMER2. Press the INCREASE orDECREASE pad to set theamount of time on timer.The timer will start automaticallywithin a few seconds of releasingthe pad.The timer, as you are setting it,will display seconds until 60seconds is reached.Then it will display minutesand seconds until 60 minutesis reached.After 60 minutes, it will displayhours (“HR” now appears indisplay) and minutes until themaximum time of 9 hours and55 minutes is reached.To Reset Timer To Cancel Timer Power Outage?If “TIMER” is showing, press the Press TIMER pad until the word After a power outage, when powerINCREASE or DECREASE pad “TIMER” quits flashing on the is restored, the display will flashuntil desired time is reached. display (about 4 seconds). and time shown will no longer beIf “TIMER” is not showing, press correct-for example, after athe TIMER pad first, then follow 5-minute power interruption theinstructions above to set the timer. clock will be 5 minutes slow.The display flashes until the clockis reset. All other functions thatwere in operation when the powerwent out will have to beprogrammed again.End of Cycle Tones Display MessagesThe end of cycle tone is a series of three beeps If “DOOr” appears on the display, the door latchfollowed by one beep every six seconds. If you would handle is not moved all the way to the right. Move thelike to remove the signal that beeps every six seconds, latch handle and cleaning will start. If “LOCK”press and hold the CLEAWOFF pad for 10 seconds. appears on the display, the oven door is in the lockedTo return the signal that beeps every six seconds, position. BA~, BROIL and COOK TIME cannot bepress and hold the CLEAWOFF pad for 10 seconds. set if the door is in the locked position.11