GE JP389BJBB - 30" Electric Modular Cooktop Use And Care Manual

Also see for JP389: Use and care & installation guide Use and care & installation guide Use and care & installation guide Specifications

Contents

COIL SURFACE UNIT MODULEHow to Insert the Module1. Be sure the controls are turnedto OFF. To install the module,position the plug to the outsidewall of the cooktop.2. Slide the module toward theoutlet in the side of the cooktopuntil the plug is pushed all theway in.3. Lower the inside edge of themodule into the cooktop untilit is flush with the cookingsurface.How to Remove the Module1. Be sure the controls are turned to OFF and thesurface units are cool before attempting to removethe module.2. Lift up the tab at the inside edge of the moduleuntil the base clears the opening at the side ofthe cooktop.3. To unplug, hold the module by the front and backedges and slide toward the center of the cooktop.Lift out when unplugged.4. If you are storing modules, do not stack them orstore other materials on top of them. This coulddamage the surface of the modules.CookwareUse medium- or heavy-weight cookware. Aluminumcookware conducts heat faster than other metals.Cast-iron and coated cast-iron cookware are slowto absorb heat, but generally cook evenly at low tomedium heat settings. Steel pans may cook unevenlyif not combined with other metals.For best cooking results pans should be fiat on thebottom. Match the size of the saucepan to the size ofthe surface unit. The pan should not extend over theedge of the surface unit more than 1 inch.Always read and follow cookware manufacturer'sinstructions on cookware use.Right WrongNot over 1 inch Over 1 inch10