GE JRP80 Owner's Manual

Also see for JBP80: Owner's manual Installation instructions Installation instructions Owner's manual Installation instructions

GE JRP80 Owner's Manual Manual pdf 16 page image

16Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety InstructionsUsing the clock and timer.To Set the ClockThe clock must be set to the correct timeof day for the automatic oven timingfunctions to work properly. The time ofday cannot be changed during a timedbaking or self-cleaning cycle.Press theCLOCK pad.Press theINCREASE andDECREASE pads.Press theSTART pad.Make sure the clock is set to thecorrect time of day.To Set the TimerPress theKITCHEN TIMER ON/OFFpad.Press theINCREASE andDECREASEpads until the amount of time youwant shows in the display. Maximumtime that can be entered in minutesis 59. Cooking times more than59 minutes should be changed tohours and minutes. For example,enter 90 minutes as 1 hour,30 minutes.If you make a mistake press theKITCHEN TIMER ON/OFF pad andbegin again.Press theSTART pad.When the timer reaches:00, thecontrol will beep 3 times followedby one beep every 6 seconds untiltheKITCHEN TIMER ON/OFF padis pressed.The 6-second tone can be canceled by followingthe steps in the Special features of your ovencontrol section under Tones at the End of aTimed Cycle.The timer is a minute timer only.The timer does not control ovenoperations. The maximum setting onthe timer is 9 hours and 59 minutes.To Reset the TimerIf the display is still showing the timeremaining, you may change it by pressingtheKITCHEN TIMER ON/OFF pad and thenpressing theINCREASE andDECREASEpads until the time you want appearsin the display.If the remaining time is not in the display(clock, delay start or cooking time are inthe display), recall the remaining time bypressing theKITCHEN TIMER ON/OFF padand then pressing theINCREASE andDECREASE pads until the time you wantappears in the display.To Cancel the TimerPress theKITCHEN TIMER ON/OFFpad twice.