GE JVM1350 Owner's Manual

Also see for Profile SpacemakerXL JVM1350: Owner's manual Owner's manual

Helpful InformationLight Bulb Replacement1 To replace the bulb(s),first disconnect the powerat the main fuse or circuitbreaker panel or pull theplug.2 Remove the screw at thefront of the light coverand lower the cover.3 Be sure the bulb(s) to bereplaced are cool beforeremoving. After breakingthe adhesive seal, removethe bulb by gently turning.4 Replace the screw.Connect electrical powerto the oven.Replace with 40-watttubular bulbs. OrderWB36X936 from your GEsupplier. Tubular 40-wattbulbs (40T6 1/2 /2),available in supermarketsand hardware stores,may also be used forreplacements.Cooktop Light/Night Light1 To replace the oven light,first disconnect the powerat the main fuse or circuitbreaker panel or pull theplug.2 Remove the top grille bytaking out the 2 screwsthat hold it in place.3 Next, remove the twoscrews located above thedoor near the center ofthe oven that secure thelight housing.Replace the burned-outbulb with a 30-wattincandescent bulb(WB02X4235), availablefrom your GE supplier.Oven LightREMOVE SCREWS40