GE JVM3150 Installation Instructions Manual

Also see for JNM3151: Owner's manual Owner's manual Installation instructions

GE JVM3150 Installation Instructions Manual Manual pdf 12 page image

Place the mounting plate against the wall and insertthe toggle wings into the holes in the wall tomount the plate.NOTE: Before tightening toggle bolts and wood screw,make sure the tabs on the mounting plate touch thebottom of the cabinet when pushedflush against the wall and that the plate is properlycentered under the cabinet.CAUTION: Be careful to avoidpinching fingers between the back of themounting plate and the wall.Tighten all bolts. Pull the plate away from the wall tohelp tighten the bolts.3AATTACH THE MOUNTING PLATETO THE WALLA1.12OUTSIDE TOP EXHAUST (Vertical Duct)Attach the plate to the wall using toggle bolts. At leastone wood screw must be used to attach the plate to awall stud.Remove the toggle wings from the bolts.Insert the bolts into the mounting platethrough the holes designated to go into drywall andreattach the toggle wings to 3/ 4” onto each bolt.14INSTALLATION OVERVIEWA1. Attach Mounting Plate to WallA2. Prepare Top CabinetA3. Install AdapterA4. Mount OvenA5. Adjust Exhaust AdaptorA6. Connect DuctworkWallMountingPlateSpacing forToggles More ThanWall ThicknessBolt EndToggleBoltToggle WingsTo use toggle bolts:Installation Instructions2