CHAPTER 6: ACTUAL VALUES PRODUCT INFORMATIONL30 LINE CURRENT DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL 6-296There is an identical menu for each of the breakers.The BKR 1 ACC ARCING AMP values are in units of kA2 -cycles. See the COMMANDS CLEAR RECORDS menu for clearingbreaker arcing current records.The BREAKER OPERATING TIME is defined as the slowest operating time of breaker poles that were initiated to open.All of the values are stored in non-volatile memory and retained with power cycling.6.6 Product information6.6.1 Model informationACTUAL VALUES PRODUCT INFO MODEL INFORMATIONThe order code, serial number, Ethernet MAC address, date and time of manufacture, and operating time are shown here.The rear panel on the device contains similar information.ETHERNET MAC ADDRESS — UR devices with firmware 7.0x and above have three Ethernet ports that can be used on threenetworks. The MAC address displays for port 1. The MAC address for port 2 is one higher. The MAC address for port 3 is onehigher than port 2. In redundant mode, the MAC addresses for ports 2 and 3 are the same as port 2.6.6.2 Firmware revisions6.6.2.1 Enhanced and standard front panelsACTUAL VALUES PRODUCT INFO FIRMWARE REVISIONS MODEL INFORMATION ORDER CODE LINE 1:L30-A00-AAA-A0A-A0A-Range: standard GE order code format ORDER CODE LINE 2:A0A-A0A-A0ARange: up to 20 alphanumeric characters ORDER CODE LINE 3: Range: up to 20 alphanumeric characters ORDER CODE LINE 4: Range: up to 20 alphanumeric characters SERIAL NUMBER: Range: standard GE serial number format ETHERNET MAC ADDRESS000000000000Range: standard Ethernet MAC address format MANUFACTURING DATE: Range: YYYY/MM/DD HH:MM:SS OPERATING TIME:0:00:00Range: operating time in HH:MM:SS PMU FEATURE ACTIVE:NoRange: Yes, No CT/ VT ADVANCED DIAGACTIVE: NoRange: Yes, No LAST SETTING CHANGE:1970/01/01 23:11:19Range: YYYY/MM/DD HH:MM:SS FIRMWARE REVISIONS L30 RelayREVISION: 7.6xRange: 0.00 to 655.35Revision number of the application firmware.
