GE MONOGRAM ZV1050 Installation Instructions Manual

Also see for Monogram ZV1050: Use and care guide Owner's manual Owner's manual Owner's manual Owner's manual

Contents

3Design InformationPRODUCT DIMENSIONSThis vent hood is designed to be used in ventedceiling-mounted installations. It can be installed overany Monogram cooktop or range, including Professionalmodels.CONTENTSDesign InformationProduct Dimensions ......................................................... 3Duct Cover Accessories ................................................. 3, 4Determine Installation Height ........................................ 4Advance PlanningTools and Materials Required .......................................... 5Power Supply ..................................................................... 5Duct Fittings ...................................................................... 6Installation InstructionsStep 1, Construct Ceiling Support ............................... 7–9Step 2, Remove Packaging.............................................. 10Step 3, Check Installation Hardware ............................. 10Step 4, Mount Template ................................................. 11Step 5, Install Support Frame......................................... 11Step 6, Secure Wiring ..................................................... 12Step 7, Size and Install Ductwork................................... 12Step 8, Install Decorative Duct Covers........................... 13Step 9, Install Hood ........................................................ 13Step 10, Connect Electrical ............................................ 14Step 11, Slide Duct Cover Down .................................... 14Step 12, Install Filters, Finalize Installation................... 15538Dia110"*Heightto Ceiling42"31-1/2"*20" to an 8-ft. ceiling using supplied duct cover32" for 9-ft. ceiling using ZX1059SFSS Accessory44" for 10-ft. ceiling using ZX10510SFSS AccessoryThis vent hood is supplied with a decorative duct coverto reach 8-ft. ceiling height, or between 7'11" and 8'1".DUCT COVER ACCESSORIESA Duct Cover Accessory may be required for your hoodinstallation height. Order accessory duct covers for 9-ft.and 10-ft. ceilings.ZX1059SFSS – For 9-ft. ceiling heightThis kit includes a decorative duct cover and supportframe to reach a 9-ft. ceiling height.ZX10510SFSS – For 10-ft. ceiling heightThis kit includes a decorative duct cover and supportframe to reach a 10-ft. ceiling height.