GE MicroCal iTC200 Operating Instructions Manual

MicroCal iTC 200 Operating Instructions 28-9639-77 AA 29Installation 3Transport 3.23.2 TransportBefore moving the system:• Disconnect all cables and tubing connected to peripheral components and liquidcontainers.• Remove all items from the top of the system.• Grasp the system under the two sides.3.3 UnpackingThe MicroCal iTC200 is delivered in protective packing material and shall be unpackedwith great care.Check the equipment for damage before starting assembly and installation.Document any damage and contact your local GE Healthcare representative.3.4 Set upArrange the components on the desktop similar to the picture of the system (see Figure3-1). The computer may be on either side depending on convenience. Do not place thewash station into position yet. Follow the instructions below for assembly.NOTICELift the MicroCal iTC200 instrument in the upright position. Do not use thefront panel cover as a lifting handle.NOTICEBefore connecting the hardware, make sure the controller PC is off.