GE P2B918 Owner's Manual And Installation Instructions

Also see for P2B918: Owner's Manual & Installation Instructions Owner's Manual & Installation Instructions Owner's Manual & Installation Instructions

Contents

GE P2B918 Owner's Manual And Installation Instructions Manual pdf 32 page image

Care and cleaning of the range.Burner heads_ Holein_ burnerheadis removable. Simply lift it Off therange for cleaning, Use a sewingneedle or twist_tie to unclog thesmall hole in the burner heads.32Burner Caps and HeadsBefore removing the burner cops and heeds,remember their size and location. Replacethem in the some !ocotion after cleaning.NOTE:Do not usestee! woo! or scouringpowders to cleon the burner ports.Burner capsLift off when cool. Wash burner caps in hot,soapg water and rinsewith clean water. Youmag scour with a plastic scouring pad toremove burned-on food particles.Burner Heads and Oval (Centefl BurnerHead/Cap AssemblyThe burner heads and the oval burnerhead/cap assembly ore removable.Simply lift them off the range for cleaning.For proper ignition, make sure thesmall hole in the section that fits over theelectrode is kept open. A sewing needleor wire twist-tie works well to unclog it.Theslits in the burner heads must be keptcleon at a!! times for an even,unhamperedflame.Clogged or dirtg burner ports or electrodeswill not allow the burner to operate properly.Ang spill on or around an electrode mustbe carefullg cleaned. Take care to not hit anelectrode with anything hard or it could bedamaged.Clean the burner heads routinelg, especiallgafter bad spillovers,which could clog theopenings. Lift off when cool.To remove burned-on food, soak the burnerheads in a solution of mild liquid detergentand hot water for 20-]0 minutes. For morestubborn stains, use a toothbrush.After cleaningBefore putting the burner caps, heads andoval head/cap assemblg back, shake outexcess water and then drg them thoroughlyby setting in a warm oven for ]0 minutes.ReplacementBurner HeadsReplaceburner heads over the electrodeson the cooktop, in the correct locationsaccording to their size.There is one small,one medium, one large and one extra largeburner head.neaaHake sureme slotin me burnerneaa spositioned over me electroae.Oval (CenterJ Burner Head/CapAssemblyReplaceme ova icen_erlhead/caoassemDbovertheelectrodeon thecooktop,Ovalhead and cad Make suretheslotinassernbg theburnerhead ispositioned over theL J electrode.L.',J ,oFront of range ElectrodeCapsReplace the matching size caps onto theburner bases or heads.Large cap _ . _=_J ExtralargeFront of range capHake sure that the heads and caps arereplaced in the correct locations.