Installation InstructionsBuilt-in DishwasherIf you have questions, call 800.GE.CARES(800.432.2737)or visit our Website at: GEAppliances.com.In Canada, please call i.800.56E.3344 or visit www.geappliances.caBEFORE YOU BEGINRead these instructions completely and carefully.WARNING:, To reduce the risk of electric shock, fire, or injury topersons, the installer must ensure that the dishwasher iscompletely enclosed at the time of installation.FORPERSONALSAFETY:Remove house fuse or opencircuit breaker before beginning installation. Do not use anextension cord or adapter plug with this appliance.The improper connection of the equipment groundingconductor can result in a risk of electric shock. Check witha qualified electrician or service representative if you arein doubt that the appliance is properly grounded.If house wiring is not 2-wire with ground, a groundmust be provided by the installer. When house wiringis aluminum, be sure to use UL-Listed anti-oxidantcompound and aluminum-to-copper connectors.When reinstalling the floor protect pan, make certain thatthe screws have been fully secured. This will ensure thatif the unit is properly grounded, that the floor protect panwill also be grounded.CAUTION:Do not remove wood base until you are ready to install thedishwasher. The dishwasher will tip over when the door isopened if base is removed.FOR YOUR SAFETYRead and observe all WARNINGS and CAUTIONS shownthroughout these instructions. While performing installationsdescribed in this booklet, gloves, safety glasses or gogglesshould be worn.IMPORTANT -Observeallgoverningcodesandordinances., Note to Installer - Be sure to leave these instructions for theconsumer's and local inspector's use.Note to Consumer - Keep these instructions with yourOwner's Manual for future reference.Skill Level - Installation of this dishwasher requiresbasic mechanical, electrical and plumbing skills. Properinstallation is the responsibility of the installer. Productfailure due to improper installation is not covered underthe GE Appliance Warranty. See warranty information.Completion Time - :1to 3 Hours. New installations requiremore time than replacement installations.IM PORTANT - ThedishwasherMUSTbeinstalledtoallow for future removal from the enclosure if service is required.Careshould be exercisedwhen the appliance is installed or removed,to reduce the likelihood of damage to the power supply cord.If you received a damaged dishwasher, you should immediatelycontact your dealer or builder.Optional Accessories - See the Owner's Manual for availablecustom panel kits.Printed in the United StatesCHECK THE FOLLOWING,Tub trim does not interfere with the door, Dishwasher is square and level at both the top and bottomof the cabinet opening, with no twisting or distortion of thetub or doorAll 4 legs of the dishwasher are firmly in contact with thefloorDrain hose is not pinched between the dishwasher andadjacent cabinets or wallsTub trim is fully seated on the tub flangeREAD CAREFULLYKEEP THESE INSTRUCTIONS 31-3154609-14 GE